skip to Main Content
Ceramic Igniter
Ceramic Igniter
Ceramic Igniter
Ceramic Igniter
Ceramic IgniterCeramic IgniterCeramic Igniter


Alumina Ceramic

Product Category:

Ceramic Heating Element

Ceramic igniters are suitable for lighting pellet and biomass burners. They can ignite wood chips, wood, coal bricks, straw, coke, etc. They can use only a fraction of the energy required by hot air fans and ignition blowers and light all fuel types. The working temperature can reach more than 900℃, around twice that of traditional metal-sheathed products, ignition times are reduced to as little as 60 seconds. This makes them significantly more economical in use.

Voltage: 120V/ 220V/ 240V
Power: 210W/ 225W/ 240W/ 255W/ 300W/ 350W
Tube Size: OD10.5×ID6.5×L90mm
Supporting Socket: NO.4/NO.5/NO6/NO.29 and NO.18 Metal kit
Lead wire: 300mm/400mm/500mm/900mm (Customized is accept)
Range of temperature: 800~1100 °C

Specific application

  • Pellet stove
  • Pellet boiler
  • Pellet burner
  • Pellet BBQ/grill
  • Biomass boiler
  • Biomass burner
  • Other burner


  1. A very small energy consumption compared to metal-sheathed products.
  2. Long service life
  3. Time to ignition 60~90 seconds
  4. Tested to 100,000 cycles, depending on operating conditions
  5. Easy to install and retrofit
  6. 900°C at the steady-state temperature
  7. Safety and environmental protection
  8. 120/220/240V forward current
  9. Fully electrically insulated with no exposed electric contacts
  10. Impervious to oxidation and corrosion
  11. Fully comply with the CE, ROHS, and REACH
  12. Ignite wood chips, split logs, coal briquettes or other biomass, straw, corn, etc
Back To Top